Showing posts with label beetle. Show all posts
Showing posts with label beetle. Show all posts

Saturday, January 10, 2015

Removing the 1969 VW Beetle Luggage Compartment

What a mess.

When I removed the carpeting last year, I discovered a giant rusted out hole. I knew I had to fix it to prevent us from getting asphyxiated. The first fix I used fiberglass cloth and POR 15. That was a good fit and all I knew how to do at the time.


 Since then, I've purchased an Eastwood welder, watched a lot of welding and body work "how to" videos, and got pumped up enough to do a more permanent fix.

When I first considered welding in a replacement, these babies were about $600 to $800 about a year ago. However, the prices dropped drastically. Two weeks ago ordered a replacement luggage section from WolfburgWest, for around $350 including shipping.

I began with using a drill and spot weld remover drill bit to remove the old welds. There are tons of them and I thought the job was taking to long so I decided to switch tactics. I used a grinder and cut off blade to just cut out the metal close to the welds.
This is the right rear area after removing the old section.
You can see the new piece to hte left. You can also see where I drilled
all the way through the car...ooops.

This is from the engine compartment, see the new section to the front. To the left is the drill out metal brackets where I removed old welds.


Great mess. Lot's of rusted out pieces.


This is the underside. You can see the rust as well as the POR 15 patch. It did the job, but I wanted more.



Everything is out, now I have to smooth it and get ready for welding





Just sizing up the new section

That turned out to be a great idea. However, I also had to use a reciprocating saw to get some hard to reach and stubborn metal.

Be careful with the drill bit, you can still go all the way through the car and not just the spot weld. Be sure the grind old paint and filler to find the welds. In some cases I had to use a hammer and screw driver to lift up old welds. Nothing works perfectly, so don't be afraid to improvise. Also, be careful to protect the metal you will be welding the new piece against.

 Finally, I had it all off after a few hours and decided to call it a day. Tomorrow, I'll clean up the metal and begin welding in the new piece.

Here is what I've used on the project::


                     

Monday, June 2, 2014

The Front Apron

Lots of Bondo and dents in the front apron
I worked for 5 to 8 hours with hammers and chisels to straighten out my bent and rusty front apron. My plan was to have a new one welded in, but I thought I might be able to fix it the old fashioned way.

However, once complete, it looked like Swiss cheese as fatigued metal snapped, rust broke through and Bondo popped out.

Torn metal found under old bondo and fiberglass.
I had the same experience with the rear apron. I was able to pound out a lot of damage and make it look halfway descent, but the amount of work yet to do was daunting.

Hours of relentless banging and pounding produced nothing but headaches. Time for a change in plan.

I decided to buy a welder and attempt to make the repairs myself. My next logical step is to review welders on line, determine what I needed, take some lessons and make it happen.

Still have about an inch more to remove before I weld.
Removing the front and rear apron required drilling out the old spot welds. Some are harder to see than others, so you might not know that old welds remain until you try to remove the skin. I used a hammer and chisel to remove the skin and chiseled out the remaining welds. Be very careful to not damage the skin on the main car. It's easy to gouge the metal, so if you err, make sure you damage the sheet metal that you are removing.
Just dreaming of what it will look like once I get it welded on.

For the front apron I used an electric saw with a blade meant to cut sheet metal. It went fast. There's a danger to fast as mistakes can happen faster than you can react. 

Saturday, March 23, 2013

Good looking dash area-Bamboo shelf for 69 VW Beetle


I just received the bamboo shelf from Jbugs.com I ordered recently. It got here in no time and looks really nice and I can’t wait to use it. I set it up just above my drink holder as well. I can’t wait to actually be able to keep the bug clean on the inside by the storage space concealed under the dash board. It looks really good too.

Beetle parts never come with instructions, so you have to search them out. This bamboo shelf came with four shelf brackets and 8 screws. I was planning to drill and screw, but a thought occurred to me; why not see if it fits.

It did fit and looks great. The best news is I didn’t have to use the hardware. For some reason the shelf fits so snug (I believe it is the thick carpet) that it is in for good. I’ll test it on the road and make sure it doesn’t vibrate loose. But for now, it looks solid.



I’ll be moving speakers and radio to different locations so the bamboo shelf can be better featured.














Monday, March 4, 2013

Fixing Rust


Huge gaping rusting holes. That’s all I can say about this project. Actually, this is only in the one area, right under the rear cargo storage area. I pulled back the carpeting and insulation to discover the rotting mess.

After some online research I found a wonderful product called Miracle Paint. A few thin coats of that on the fiber glass mesh and viola, instant metal, or a close proximity. The repair was successful and I don’t have the burnt oil and exhaust fumes leaking in any more.

Here’s how you get to it:

Remove the back seat and back rest.

For the bench, just pull up on the front and pull out. The seat just slides out.

For the back rest, you’ll need to remove two bolts at either end. Then pull off the carpet and insulation. Chances are that these will be glued down and you’ll replace them. I spent about $200 on mine from www.westcoastmetric.com (includes carpet for entire interior and the insulation).

Grind down the metal a bit. You can leave some rust and apply rust restoration spray from the  auto parts store.

A shop vac comes in handy to clean up the 50 years of dirt, dust, food and whatever is hanging around under the seats.

Then apply the miracle paint onto the mesh. Be sure to pre-cut the mesh to fit the repair area.





Saturday, February 16, 2013

Proud new owner


I just bought a 69 VW Beetle from a man who restored it to driving condition. I love driving it around, but it still needs some work. I bought it for $1500 and understood it may still need some “polishing”. I am enjoying fixing it up and learning how it works. I’ll use this blog to share our story.

First things first and that’s safety. I drove my kids around the block and one of the dry rotted tires went flat. I called around to see what would fit and none of the big box companies could help. They didn’t understand the small tire size. It wasn’t until I called Big 10 Tires that they could help me out. I had to go a little wider, but there were able to put the right ones on. When I pulled up with the bug, I got the royal treatment. They loved my car.

Now that I’ve got new tires, I drove around to work and around the neighborhood. I got a lot of thumbs up and encouragement. It’s so nice. However, I have to find out what’s making me dizzy.

Apparently exhaust has been leaking into the cabin, so I climbed in back to see what was up. It wasn’t until I removed the rear luggage storage carpet and insulation material that I discovered the deal; rusted floor pan.

Next I rip out the entire interior and find more rust and holes. At the same time I go into the trunk to find out what could be causing air to rush in through my ash gray and other areas.

I also discover water standing under the trunk carpeting. The problem; A missing drain hose from the fresh air box. I follow that line and do research and discover that it’s a large problem; water and air leaks through this system.

In the mean time, I’ve been making small improvements by replacing old control knobs on the dash and the horn ring and cover on the steering wheel.









Here are my favorite stores online:
www. westcoastmetric.com
www. jbugs.com
http://www.vw-wagenwerks.com/servlet/Categorieswww.wolfsburgwest.com

Visit often as I will document my journey to a further restoration of this magnificent car.