Great VW swag here.
Red Bike Publishing Merchandise Shop
Showing posts with label volkswagon. Show all posts
Showing posts with label volkswagon. Show all posts
Saturday, July 6, 2013
People's Wagon Merchandise Shop
Sunday, March 31, 2013
Tail Pipe Chrome Exhaust
Clang! That's the noise I heard. I knew something was wrong, but did not know exactly what the problem could be. It wasn't until I looked in the rear view mirror and saw a tail pipe tumbling end over end and cars were swerving out of the way, that I understood what was happening. A second later, the perfectly humming engine began it's throaty roar. Not a bad sound actually.
I'd never thrown a tail pipe before, so I started searching the internet and asked experts like my father. Yep, I'd thrown a tailpipe and yes, it's supposed to be loud like that. However, it's just noise and won't hurt the engine. An no, I don't need a new exhaust, just a new tailpipe.
I ordered my tailpipe from www.westcoastmetric.com and it arrived in a few days. I actually ordered two so that I could have a brand new shiny set. However, I only ordered one set of clamps and had to reuse one of the older sets.
The job was easy, just loosen the old clamps, slide the tailpipe into the muffler, tighten the new clamps and your off.
Be sure to insert the tailpipe as far as it will go. Also, install the clamp so that it covers the tailpipe and muffler lips. If not, the tailpipe won't stay on.
I'd never thrown a tail pipe before, so I started searching the internet and asked experts like my father. Yep, I'd thrown a tailpipe and yes, it's supposed to be loud like that. However, it's just noise and won't hurt the engine. An no, I don't need a new exhaust, just a new tailpipe.
I ordered my tailpipe from www.westcoastmetric.com and it arrived in a few days. I actually ordered two so that I could have a brand new shiny set. However, I only ordered one set of clamps and had to reuse one of the older sets.
The job was easy, just loosen the old clamps, slide the tailpipe into the muffler, tighten the new clamps and your off.
Be sure to insert the tailpipe as far as it will go. Also, install the clamp so that it covers the tailpipe and muffler lips. If not, the tailpipe won't stay on.
![]() |
| image courtesy of http://www.clubvw.org.au/oldart016 |
Labels:
69 vw beetle,
exhaust,
tail pipe,
Volkswagen,
volkswagon
Monday, March 4, 2013
Fixing Rust
Huge
gaping rusting holes. That’s all I can say about this project. Actually, this
is only in the one area, right under the rear cargo storage area. I pulled back
the carpeting and insulation to discover the rotting mess.
After
some online research I found a wonderful product called Miracle Paint. A few
thin coats of that on the fiber glass mesh and viola, instant metal, or a close
proximity. The repair was successful and I don’t have the burnt oil and exhaust
fumes leaking in any more.
Here’s
how you get to it:
Remove
the back seat and back rest.
For
the bench, just pull up on the front and pull out. The seat just slides out.
For
the back rest, you’ll need to remove two bolts at either end. Then pull off the
carpet and insulation. Chances are that these will be glued down and you’ll
replace them. I spent about $200 on mine from www.westcoastmetric.com (includes
carpet for entire interior and the insulation).
Grind down the metal a bit. You can leave some rust and apply rust restoration spray from the auto parts store.
A shop vac comes in handy to clean up the 50 years of dirt, dust, food and whatever is hanging around under the seats.
Then
apply the miracle paint onto the mesh. Be sure to pre-cut the mesh to fit the
repair area.
Labels:
beetle,
bug,
rust repair.,
volks wagen,
volkswagon,
vw
Subscribe to:
Posts (Atom)
