Clean the chassis:
1. Pressure wash if possible use degreaser to clean off
caked on dirt, mud and grease. Mine had 43 years' worth. I actually found a
steering gear box under some of that stuff
2. Use a power drill, stone, wire or
other grinding attachment.
3. Grind away.
4. Turn chassis on its side and continue grinding on the
bottom 5. Once free of grime, repair any rust holes with miracle paint, POR-15
or other similar product with fiberglass material.
6. Repaint to taste engine, chassis, transmission, etc,
with enamel or other resistant and tough paint.
7. Clean and restore old bolts and washer when possible.
8. Remove and replace ball joints, tie rod ends, shocks,
CV joint boots, etc.
9. Restore hardware, pedal assembly, brake lines, master
cylinder etc. and other components.
No comments:
Post a Comment